The control panel provides access to various menus to set up the machine or use the machine’s functions.

[Note]
  • An asterisk (*) appears next to the currently selected menu.

  • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.

  • Some menu names may differ from your machine depending on its options or the models.

  • The menus are described in the Advanced Guide (see Useful Setting Menus).

Accessing the menu

  1. Select the Fax, Copy, or Scan button on the control panel depending on the feature to be used.

  2. Select (Menu) until the menu you want appears on the bottom line of the display and press OK.

  3. Press the left/right arrows until the needed menu item appears and press OK.

  4. If the setting item has sub menus, repeat step 3.

  5. Press OK to save the selection.

  6. Press (Stop/Clear) to return to the ready mode.

Fax Feature [a] (see Fax Feature)

Fax Setup [a] (see Sending setup, Receiving setup)

Copy Feature (see Copy feature)

Darkness

Light+5- Light+1

Normal

Dark+1- Dark+5

Resolution

Standard

Fine

Super Fine

Photo Fax

Color Fax

Original Size

Multi Send

Delay Send

Priority Send

Send Forward

Rcv. Forward

Forward to Fax

Forward to PC

Forward & Print

Secure Receive

Off

On

Print

Add Page

Cancel Job

Sending

Redial Times

Redial Term

Prefix Dial

ECM Mode

Modem Speed

Fax Confirm.

Image TCR

Dial Mode [b]

Receiving

Receive Mode

Fax

Tel

Ans/Fax

DRPD

Ring to Answer

Stamp Rcv Name

Rcv Start Code

Auto Reduction

Discard Size

Junk Fax Setup

DRPD Mode

Duplex Print [c]

Change Default

Darkness

Resolution

Original Size

Manual TX/RX

Original Size

Reduce/Enlarge

Duplex [d]

1 Sided

1->2Sided

1->2Sided Rot.

Darkness

Light+5- Light+1

Normal

Dark+1- Dark+5

Original Type

Text

Text/Photo

Photo

Collation

Layout

Normal

2-Up

4-Up

ID Copy

Adjust Bkgd.

Off

Auto

Enhance Lev.1

Enhance Lev.2

Erase Lev.1- Erase Lev.4

[a] M267xF/ M267xFN/ M287xFD/ M287xFW/ M267xFH/ M267xHN/ M287xHN/M288xFW/M288xHW only.

[b] This option may not be available depending on your country.

[c] M287xFD/M287xFW/ M287xHN/M288xFW/M288xHW only.

[d] M287xND/M287xFD/M287xDW/M287xFW/M287xHN/M288xFW/M288xHW only.

Copy Setup

(see Copy Setup)

System Setup

(see System setup)

Print Setup [e]

(see Print menu)

Change Default

Original Size

Copies

Reduce/Enlarge

Duplex [a]

Darkness

Original Type

Collation

Machine Setup

Machine ID [b]

Fax Number [b]

Date & Time [b]

Clock Mode [b]

Language

Default Mode [b]

Power Save

Auto Power Off [c]

Wakeup Event

System Timeout

Job Timeout

Altitude Adj.

Auto Continue

Paper Substit.

Toner Save

Eco Settings

Paper Setup

Paper Size

Paper Type

Paper Source

Margin

Sound/Volume [b]

Key Sound

Alarm Sound

Speaker

Ringer

Report

Configuration

Demo Page

Network Conf. [d]

Supplies Info.

Usage Counter

Fax Received [b]

Fax Sent [b]

Scheduled Jobs [b]

Fax Confirm. [b]

Junk Fax [b]

PCL Font List [e]

Address Book [b]

Maintenance

CLR Empty Msg

Supplies Life

Image Mgr.

TonerLowAlert

ImgU.Low Alert [f]

Serial Number

Orientation

Portrait

Landscape

Duplex

Off

Long Edge

Short Edge

Copies

Resolution

Clear Text

Auto CR

SkipBlankPages

Emulation

[a] M287xND/ M287xFD/M287xDW/M287xFW/M287xHN/M288xFW/M288xHW only.

[b] M267xF/ M267xFN/ M287xFD/M287xFW/M267xFH/ M267xHN/M287xHN/M288xFW/M288xHW only.

[c] M267xN/ M287xND only.

[d] M267xN/M267xFN/M287xND/ M287xFD/M287xDW/M287xFW/M267xHN/M287xHN/M288xFW/M288xHW only.

[e] M287xND/M287xFD/M287xDW/M287xFW/M287xHN/M288xFW/M288xHW only.

[f] M2675/M2676/M2875/M2876/M2885/M2886 series only.

Network

TCP/IP (IPv4) [a]

DHCP

BOOTP

Static

TCP/IP (IPv6) [a]

IPv6 Activate

DHCPv6 Config

Ethernet Speed [a]

Automatic

10Mbps Half

10Mbps Full

100Mbps Half

100Mbps Full

Wireless [b]

Wi-Fi ON/OFF [b]

Wi-Fi Direct [b]

WPS Setting [b]

WLAN Setting [c]

WLAN Default [b]

WLAN Signal [b]

Protocol Mgr. [a]

Net. Activate

Http Activate

WINS

SNMP V1/V2

UPnP(SSDP)

MDNS

SetIP

SLP

Network Conf. [a]

Clear Setting [a]

[a] M267xN/M267xFN/M287xND/M287xFD/M287xDW/M287xFW/M267xHN/M288xFW/M288xHW only.

[b] M287xDW/M287xFW/M288xFW/M288xHW only.

[c] M287xFW/M288xFW only.