Machine overview

> > >

Machine overview

Components

The actual component may differ from the illustration below. Some components may change depending on the circumstances.


Machine	Quick installation guide

Power cord	Software CD^[a]

Misc. accessories^[b]
^[a] The software CD contains the print drivers, user’s guide, and software applications. ^[b] Miscellaneous accessories included with your machine may vary by country of purchase and specific model.

Front view


	This illustration may differ from your machine depending on your model. There are various types of machine. Some features and optional goods may not be available depending on model or country (see Features by models).

CLP-41x series/C140x series/C181x series

1	Output support	8	Toner cartridges
2	Output tray	9	Toner cartridge handle
3	Control panel	10	Intermediate Transfer Belt (ITB)
4	Control board cover	11	Paper width guides on a manual feeder
5	Tray 1	12	Manual feeder
6	Front cover	13	NFC (Near Field Communication) tag ^[a]
7	Front cover release button	13	NFC (Near Field Communication) tag ^[a]
^[a] C140xW/C181xW only.

CLP-68x series

1	Output support	9	Multi-purpose tray
2	Output tray	10	Front cover
3	Control panel	11	Front cover release button
4	Control board cover	12	Toner cartridges
5	USB memory port	13	Toner cartridge handle
6	Optional tray^[a]	14	Intermediate Transfer Belt (ITB)
7	Tray 1	15	Paper width guides on a multi-purpose tray
8	Push-release of Multi-purpose tray	16	Multi-purpose support tray
^[a] This is an optional feature.

Rear view


	This illustration may differ from your machine depending on your model. There are various types of machine. Some features and optional goods may not be available depending on model or country (see Features by models).

CLP-41x series/C140x series/C181x series	CLP-68x series

1	Waster toner container	5	Power-switch
2	Rear cover	6	USB port^[a]
3	Rear cover handle	7	Network port
4	Power receptacle	8	5V output port for IEEE 1284B parallel connector ^[a]^[b]
^[a] The optional IEEE 1284B parallel connector can be used by plugging in both the USB port and the 5V output port. ^[b] This is an optional feature. CLP-68x series only.