The control panel provides access to various menus to setup the machine or use the machine’s functions.

[Note]

  • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.

  • Some menu names may differ from your machine depending on its options or the models.

Accessing the menu

  1. Select the Fax, Copy, or Scan button on the control panel depending on the feature to be used.

  2. Select (Menu) until the menu you want appears on the bottom line of the display and press OK.

  3. Press the arrows until the needed menu item appears and press OK.

  4. If the setting item has sub menus, repeat step 3.

  5. Press OK to save the selection.

  6. Press (Stop/Clear) to return to the ready mode.

Fax Feature [a]

Fax Setup [a]

Copy Feature

Darkness

Normal

Dark+1- Dark+5

Light+5- Light+1

Resolution

Standard

Fine

Super Fine

Photo Fax

Color Fax

Original Size

Multi Send

Delay Send

Priority Send

Send Fax

Forward to Fax

Rcv. Forward

Forward to Fax

Forward to PC

Forward&Print

Secure Receive

Off

On

Print

Add Page

Cancel Job

Sending

Redial Times

Redial Term

Prefix Dial

ECM Mode

Fax Confirm

Image TCR

Dial Mode [b]

Receiving

Receive Mode

Ring To Answer

Stamp RCV Name

RCV Start Code

Auto Reduction

Discard Size

Junk Fax Setup

DRPD Mode [b]

Change Default

Resolution

Darkness

Original Size

Auto Report

On

Off

Manual TX/RX

On

Off

Original Size

Reduce/Enlarge

Darkness

Normal

Dark+1- Dark+5

Light+5- Light+1

Original Type

Text

Text/Photo

Photo

Layout

Normal

2-Up

4-Up

ID Copy

Adjust Bkgd.

Off

Auto

Enhance Lev.1

Enhance Lev.2

Erase Lev.1- Erase Lev.4

[a] SCX-465xF/4521FS/4521HS/465xFN/465xHN/4521NS Series only.

[b] This option may not be available depending on your country.

Copy setup

System Setup

Network[c](Continue)

Change Default

Original Size

Copies

Copy Collation

Reduce/Enlarge

Darkness

Original Type

Adjust Bkgd

Machine Setup

Machine ID [a]

Fax Number [a]

Date & Time [a]

Clock Mode [a]

Language

Power Save

Auto Power Off [b]

Wakeup Event

System Timeout

Job Timeout

Altitude Adj.

Auto Continue

Paper Substit.

Toner Save

Eco Settings

Paper Setup

Paper Size

Paper Type

Margin

Sound/Volume

Key Sound

Alarm Sound

Speaker

Ringer

Report

Configuration

Supplies Info.

Address Book [a]

Fax Confirm [a]

Fax Sent [a]

Fax Received [a]

Scedule Jobs [a]

Junk Fax [a]

Network Conf. [c]

Usage Counter

Fax Options [a]

Maintenance

CLR Empty Msg. [d]

Supplies Life

Serial Number

TonerLow Alert

TCP/IP(IPv4)

DHCP

BOOTP

Static

TCP/IP(IPv6)

IPv6 Activate

DHCPv6 Config

Ethernet Speed

Automatic

10Mbps Half

10Mbps Full

100Mbps Half

100Mbps Full

Clear Setting

Network Conf.

Protocol Mgr.

[a] SCX-465xF/4521FS/4521HS/465xFN/465xHN/4521NS Series only.

[b] SCX-465x/465xN/4021S/4321NS Series only.

[c] SCX-465xN/4321NS/465xFN/465xHN/4521NS Series only.

[d] This option only appears when small amount of toner is left in the cartridge.