The control panel provides access to various menus to set up the machine or use the machine’s functions.

[Note]
  • This function is not supported for M207x Series (see Control panel overview).

  • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine.

  • Some menu names may differ from your machine depending on its options or the models.

Accessing the menu

  1. Select the Fax, Copy, or Scan button on the control panel depending on the feature to be used.

  2. Select (Menu) until the menu you want appears on the bottom line of the display and press OK.

  3. Press the arrows until the needed menu item appears and press OK.

  4. If the setting item has sub menus, repeat step 3.

  5. Press OK to save the selection.

  6. Press (Stop/Clear) to return to the ready mode.

Items

Options

Fax Feature

(M207xF Series,

M207xFW Series)

Darkness

Normal

Dark+1- Dark+5

Light+5- Light+1

Resolution

Standard

Fine

Super Fine

Photo Fax

Color Fax

Scan Size

Multi Send

Delay Send

Fax Feature (Continue)

Priority Send

Forward

Fax

PC

Secure Receive

Off

On

Print

Add Page

Cancel Job

Fax Setup

(M207xF Series,

M207xFW Series)

Sending

Redial Times

Redial Term

Prefix Dial

ECM Mode

Fax Confirm

Image TCR

Dial Mode [a]

Fax Setup (Continue)

Receiving

Receive Mode

Ring To Answer

Stamp RCV Name

RCV Start Code

Auto Reduction

Discard Size

Junk Fax Setup

DRPD Mode [a]

Change Default

Resolution

Darkness

Contrast

Scan Size

Manual TX/RX

On

Off

Copy Feature

Scan Size

Reduce/Enlarge

Darkness

Normal

Dark+1- Dark+5

Light+5- Light+1

Copy Feature

(Continue)

Original Type

Text

Text/Photo

Photo

Layout

Normal

2-Up

4-Up

ID Copy

Poster Copy

Clone Copy

Adjust Bkgd.

Off

Auto

Enhance Lev.1

Enhance Lev.2

Erase Lev.1- Erase Lev.4

Copy Setup

Change Default

Scan Size

Copies

Copy Collation

Reduce/Enlarge

Darkness

Contrast

Original Type

Adjust Bkgd.

System Setup

Machine Setup

Machine ID

Fax Number

Date & Time

Clock Mode

Language

Power Save

Wakeup Event

System Timeout

Altitude Adj.

Auto Continue [b]

Paper Mismatch

Paper Substit. [b]

Toner Save

Eco Settings

Paper Setup

Paper Size

Paper Type

Margin

System Setup (Continue)

Sound/Volume

Key Sound

Alarm Sound

Speaker

Ringer

Report

All Report

Configuration

Supplies Info.

Address Book

Fax Send

Fax Sent

Fax Received

Schedule Jobs

Junk Fax

Network Conf. [c]

Usage Counter

Fax Options

Maintenance

CLR Empty Msg. [d]

Supplies Life

Serial No.

TonerLow Alert

System Setup (Continue)

Clear Setting

All Settings

Fax Setup

Copy Setup

System Setup

Network Setup [c]

Address Book

Fax Sent

Fax Received

Network [c]

(M207xW Series,

M207xFW Series)

TCP/IP (IPv4)

DHCP

BOOTP

Static

TCP/IP (IPv6)

IPv6 Activate

DHCPv6 Config

Ethernet Speed

Automatic

10Mbps Half

10Mbps Full

100Mbps Half

100Mbps Full

Network [c] (Continue)

Wireless

Wi-Fi ON/OFF

Wi-Fi Direct

WPS Setting

WLAN Setting

WLAN Default

WLAN Signal

Clear Setting

Network Conf.

[a] This option may not be available depending on your country.

[b] This option only appears if Paper Mismatch is enabled.

[c] M207x F/ M207xFW Series only.

[d] This option only appears when small amount of toner is left in the cartridge.