Machine ID

Sets the machine ID which will be printed at the top of each fax page that you send.

Fax Number

Sets the fax number which will be printed at the top of each fax page that you send.

Date & Time

Sets the date and time.

Clock Mode

Selects the format for displaying time between 12 hr. and 24 hr.

Language

Sets the language of the text that appears on the control panel display.

Default Mode

Sets the default status.

Power Save

Sets how long the machine waits before going to power save mode.

When the machine does not receive data for an extended period of time, power consumption is automatically lowered.

Auto Power Off

Turns power off automatically when the machine has been in power save mode for the length of time set in Auto Power Off > On > Timeout.

	This option only appears in the C48x/C48xW series. To turn the machine on again, press the (Power/Wake Up) button on the control panel (make sure the main power switch is on). If you run the printer driver or Samsung Easy Printer Manager, the time automatically extends. While the machine is connected to the network or working on a print job, Auto Power Off feature doesn't work.

Wakeup Event

You can set the condition to wake up from power-save mode.

System Timeout

Sets the time that the machine remembers previously used copy settings. After the timeout, the machine restores the default copy settings.

Job Timeout

Sets the length of time the printer waits before printing the last page of a print job that does not end with a command to print the page.

Altitude Adj.

Optimize print quality according to the machine’s altitude.

Humidity

Optimizes print quality according to the humidity in the environment.

Auto Continue

Determine whether or not the machine continues printing when it detects the paper does not match the paper settings.

Paper Substit.

Automatically substitutes the printer driver’s paper size to prevent the paper mismatch between Letter and A4. For example, if you have A4 paper in the tray but you set the paper size to Letter in the printer driver, the machine prints on A4 paper and vice versa.

Eco Settings

Allows you to save print resources and enables eco-friendly printing.

Paper Size

Sets the paper size as A4, Letter, or other paper sizes, according to your requirements.

Paper Type

Chooses the type of the paper for each tray.

Margin

Sets the margins for the document.

Key Sound

Turns the key sound on or off. With this option set to on, a tone sounds each time a key is pressed.

Alarm Sound

Turns the alarm sound on or off. With this option set to on, an alarm tone sounds when an error occurs or fax communication ends.

Speaker

Turns on or off the sounds from the telephone line through the speaker, such as a dial tone or a fax tone. With this option set to Comm. which means the speaker is on until the remote machine answers.

	You can adjust the volume level using On Hook Dial. You can adjust the speaker volume only when the telephone line is connected. Press (fax) on the control panel. Press On Hook Dial. A dial tone sounds from the speaker. Press the arrows until you hear the volume you want. Press On Hook Dial to save the change and return to ready mode.

Ringer

Adjusts the ringer volume. For the ringer volume, you can select off, low, middle, and high level.

Configuration

Prints a report on the machine's overall configuration.

Supplies Info.

Prints supplies’ information page.

Demo Page

Prints the demo page to check whether your machine is printing properly or not.

Address Book

Prints all of the fax number currently stored in the machine’s memory.

Fax Confirm.

Prints a transmission report including the fax number, the number of pages, the elapsed time of the job, the communication mode, and the communication results for fax job. You can set up your machine to automatically print a transmission confirmation report after each fax job.

Email Sent

Print to check the transmission state of the Scan to Email job.

Fax Sent

Prints information on the faxes you have recently sent.

Fax Received

Prints information on the faxes you have recently received.

Scheduled Jobs

Prints the document list currently stored for delayed faxes along with the starting time and type of each operation.

Junk Fax

Prints the fax numbers specified as junk fax numbers.

PCL Font

Print to see the PCL font list.

PS Font

Print to see the PS font list

Network Conf.

Prints information on your machine’s network connection and configuration.

Usage Counter

Prints a usage page. The usage page contains the total number of pages printed.

CLR Empty Msg

When toner cartridge is empty, this option appears. You can clear the empty message.

Supplies Life

Shows the supply life indicators (see Monitoring the supplies life.)

Image Mgr.

Allows you to adjust the color setting such as contrast level, color registration, color density, etc.

Serial Number

Shows the machine’s serial number. When you call for service or register as a user on the Samsung website, you can find this.

TonerLow Alert

Customizes the level to alert toner low or toner empty (see Setting the toner low alert).

ImgU.Low Alert

Customizes the level to alert imaging unit low.