> Basic > Maintenance > Setting the toner low alert

Setting the toner low alert

If the amount of toner in the cartridge is low, a message or LED informing the user to change the toner cartridge appears. You can set the option for whether or not this message or LED appears.

[Note]

  • You change the machine’s setting set in the machine from Samsung Easy Printer Manager or SyncThru™ Web Service.

    • If your machine is connected to the local, you can set the machine’s setting from Samsung Easy Printer Manager > Advanced Setting > Device Settings (see Using Samsung Easy Printer Manager ).

    • If your machine is connected to the network, you can set themachine’s setting from SyncThru™ Web Service > Settings tab > Machine Settings (see Using SyncThru™ Web Service).

  • It may be necessary to press OK to navigate to lower-level menus for some models.

  1. Select (Menu) > System Setup > Maintenance > TonerLow Alert on the control panel.

  2. Select the option you want.

  3. Press OK to save the selection.