> Advanced > Using a Network-Connected Machine > Installing driver over the network

Installing driver over the network

[Note]

  • Some features and optional goods may not be available depending on model or country (see Features by model).

  • The machine that does not support the network interface, it will not be able to use this feature (see Rear view).

  • You can install the printer driver and software when you insert the software CD into your CD-ROM drive.For windows, select the printer driver and software in the Select Software to Install window.

Windows

[Note]

The firewall software might be blocking network communication. Before connecting the device to the network, disable the computer’s firewall.

  1. Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see Setting IP address).

  2. Insert the supplied software CD into your CD-ROM drive.

    If the installation window does not appear, click Start > All programs > Accessories > Run.

    X:\Setup.exe replacing “X” with the letter, which represents your CD-ROM drive and click OK.

    • For Windows 8,

      If the installation window does not appear, from Charms, select Search > Apps and search for Run. Type in X:\Setup.exe, replacing “X” with the letter that represents your CD-ROM drive and click OK.

      If “Tap to choose what happens with this disc.” pop-up window appears, click the window and select Run Setup.exe.

  3. Review and accept the installation agreements in the installation window. Then, click Next.

  4. Select Network on the Printer Connection Type screen Then,click Next.

  5. Follow the instructions in the installation window.

From the Windows 8 Start Screen

[Note]

  • The V4 driver is automatically downloaded from the Windows Update if your computer is connected to the Internet. If not, you can manually download the V4 driver from Samsung website, http://www.samsung.com > find your product > Support or downloads.

  • You can download Samsung Printer Experience app from the Windows Store. You need have a Microsoft account to use the Windows Store.

    1. From Charms, select Search.

    2. Click Store.

    3. Search and click Samsung Printer Experience.

    4. Click Install.

  • If you install the driver using the supplied software CD, V4 driver is not installed. If you want to use the V4 driver in the Desktop screen, you can download from the Samsung website, http://www.samsung.com >find your product > Support or downloads.

  • If you want to install Samsung’s printer management tools, you need to install them using the supplied software CD.

  1. Make sure that the machine is connected to the network and powered on. Also, your machine’s IP address should have been set (see Setting IP address).

  2. From Charms, select Settings > Change PC settings > Devices.

  3. Click Add a device.

    Discovered machines will be shown on the screen.

  4. Click the model name or host name you wish to use.

    [Note]

    You can print a Network Configuration Report from the machine’s control panel that will show the current machine’s host name (see Printing a network configuration report).

  5. The driver is automatically installed from the Windows Update.

Silent installation Mode

Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window.

Command-line Parameters

Following table shows commands that can be used in the command window.

[Note]

Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely.

Command- line

Definition

Description

/s or/S

Starts silent installation.

Installs machine drivers without prompting any UIs or user intervention.

/p”<port name>” or/P”<port name>”

Specifies printer port.

[Note]

Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command.

Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name.

For example:

  • /p”xxx.xxx.xxx.xxx” in where, “xxx.xxx.xxx.xxx” means IP address for network printer. /p”USB001”, /P”LPT1:”, /p”hostname”

/a”<dest_path>” or/A”<dest_path>”

Specifies destination path for installation.

[Note]

The destination path should be a fully qualified path.

Since machine drivers should be installed on the OS specific location, this command applies to only application software.

/n”<Printer name>” or/N”<Printer name>”

Specifies printer name. Printer instance shall be created as specified printer name.

With this parameter, you can add printer instances as you wish.

/nd or/ND

Commands not to set the installed driver as a default machine driver.

It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won’t be applied because Windows OS will set installed printer driver as a default machine driver.

/x or/X

Uses existing machine driver files to create printer instance if it is already installed.

This command provides a way to install a printer instance that uses installed printer driver files without installing an additional driver.

/up”<printer name>” or/UP”<printer name>”

Removes only specified printer instance and not the driver files.

This command provides a way to remove only specified printer instance from your system without effecting other printer drivers. It will not remove printer driver files from your system.

/d or/D

Uninstalls all device drivers and applications from your system.

This command will remove all installed device drivers and application software from your system.

/v”<share name>” or/V”<share name>”

Shares installed machine and add other available platform drivers for Point & Print.

It will install all supported Windows OS platform’s machine drivers to system and share it with specified <share name> for point and print.

/o or /O

Opens Printers and Faxes folder after installation.

This command will open Printers and Faxes folder after the silent installation.

/h, /H or /?

Shows Command-line Usage.

Mac

  1. Make sure that the machine is connected to your computer and powered on.

  2. Insert the supplied software CD into your CD-ROM drive.

  3. Select the CD-ROM volume that appears on Finder.

  4. Double-click the Install Software icon.

  5. Read the license agreement and check installation agreement button.

  6. Click Next.

  7. Select Network on the printer connection type screen.

  8. Click Next.

  9. Follow the instructions in the installation window.

Linux

You need to download Linux software packages from the Samsung website to install the printer software (http://www.samsung.com > find your product > Support or Downloads).

  1. Make sure that the machine is connected to your network and powered on. Also, your machine’s IP address should have been set.

  2. Copy Unified Linux Driver package to your system.

  3. Open Terminal program and go to the folder that you copied thepackage to.

  4. Extract the package.

  5. Move to uld folder.

  6. Execute ” ./install.sh“ command (If you are not logged in as root,execute the command with “sudo” as “sudo ./install.sh”).

  7. Proceed with installation.

  8. When installation finished, launch Printing utility (Go to System > Administration > Printing or execute “system-config-printer“ command in Terminal program).

  9. Click Add button.

  10. Select AppSocket/HP JetDirect and enter your machine’s IP address.

  11. Click Forward button and add it to your system.