Image Mgr.

> > >

Image Mgr.


	Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see Menu overview).

To change the menu options:

Press (Menu) > Image Mgr. on the control panel.

Option

Description

Custom Color

This menu allows you to adjust contrast, color by color.

Default: Optimizes colors automatically.
Print Density: Allows you to manually adjust color density for print. Adjust the print density.

It is recommended to use the Default setting for best color quality.

Auto Color Reg.

The machine virtually prints certain patterned image to calibrate the color printing position. This feature enhances the colored image sharper and clearer, which means the machine prints the colored image on the paper more like the one in the monitor.


	If you have moved the machine, it is strongly recommended to operate this menu manually.

Tone Adjust.

Default: The machine automatically calibrate the toner density of machine for the best possible color print quality. If you select Off, the machine is calibrated by the factory default toner density.
Auto Tone Adj. Allows you to automatically adjust tone for the best possible print quality.
Cal. ID Sensor: Automatically calculates the reduced or worn out supplies like toner or machine parts and uses this information to adjust the color density. For example, if the yellow toner is running out, the machine calculates the amount of remaining yellow toner and adjusts color density so the printouts are fine.