Control panel
|
1 |
Display screen |
Shows the current machine status and prompts during an operation. You can set menus easily using the display screen. |
|
2 |
Motion sensor hole |
Motion sensor. |
|
3 |
a. Power LED |
Shows the power status of your machine. |
|
b. |
Turn the power on or off. When the blue LED is on, the machine is powered on and you can use it. If you turn the machine off, press this button for more than two seconds, and then confirmation window appears. |
|
|
4 |
Status LED |
Shows the status of your machine (see Understanding the LEDs). |
![[Caution]](../../common/icon_caution.png){kind=icon}
|
|
|
When you use the display screen, use your finger only. The screen may be damaged with a sharp pen or anything else. |
Adusting angle of the control panel
You can adjust the angle of the control panel for your convenience. Refer to the illustration below.
![[Note]](../../common/icon_note.png){kind=icon}
|
|
|
When moving or storing the machine, press the unlock button to fold down the control panel. The unlock button is located on the top side of the control panel. |
