> Advanced > Using a Network-Connected Machine > PrinterOn

PrinterOn

Registering your PrinterOn-enabled Samsung printer on the PrinterOn service allows you to print documents on that printer from anywhere in the world. The PrinterOn service also enables you to print directly from the PrinterOn Mobile app on your iOS or Android device. After installing the PrinterOn Mobile app, you can register your device on the PrinterOn service by using your mobile number for authentication.

To use the PrinterOn feature, you must register your printer on the PrinterOn website (www.printeron.com).

Only administrators can register or configure a printer on the PrinterOn service.

This chapter does not explain all the features in the PrinterOn service. Instead, it explains how to register a printer on the PrinterOn service from the control panel of the machine and the SyncThru™ Web Service.

For more information about the PrinterOn service, visit the PrinterOn website (www.printeron.com).

Registering your printer on the PrinterOn service

To register your printer on the PrinterOn service, you must activate the PrinterOn feature on the machine through the control panel or SyncThru™ Web Service.

Registering from the control panel

[Note]

Before you begin this process, make sure that your printer is turned on and can connect to the Internet.
Machines with a display screen

  1. Press the (Menu) button on the control panel and select PrinterOn from the display screen.

  2. Press OK.

  3. Press Yes to active the PrinterOn feature.

  4. Press OK.

    Now, your printer is registered on the PrinterOn service.

Registering from Web Browser

  1. Ensure that the machine is connected to the network.

  2. On your computer, open a web browser (Internet Explorer, Safari, or Firefox) and type the IP address of the machine in the address bar. Then, press Enter.

    For example,

  3. Click Login in the upper right corner of the SyncThru™ Web Service website.

  4. If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and Password. We recommend you to change the default password for security reasons.

    • ID:  admin

    • Password:  sec00000

  5. When the SyncThru™ Web Service window opens, click Settings > Network Settings > PrinterOn Cloud Print.

    [Note]

    If the XOA tab is shown, press XOA > PrinterOn Cloud Print from SyncThru™ Web Service.

  6. Select Enable for the PrinterOn Cloud Print Protocol setting.

  7. Click Apply.

    Now, your printer is registered on the PrinterOn service.

Using the PrinterOn Service

For instruction on how to print using the PrinterOn service, refer to the PrinterOn service website (www.printeron.com).