Basic scanning

[Note]
  • For special scanning features, refer to the Advanced Guide (see Scan features).

  • Depending on models or options, some menus may not be supported (see Features by model).

Basic Scanning

This is the normal and usual procedure for scanning originals.

This is a basic scanning method for USB-connected machine.

[Note]
  • It may be necessary to press OK to navigate to lower-level menus for some models.

  • if you want to scan using the network, refer to the Advanced Guide (see Scanning from network connected machine).

  1. Place a single document face down on the document glass, or load the documents face up into the document feeder (see Loading originals).

  2. Select (scan) > Scan to PC > Local PC on the control panel.

    Or select Scan to > Local PC on the control panel.

    [Note]

    If you see Not Available message, check the port connection, or select Enable Scan from Device Panel in Samsung Easy Printer Manager > Switch to advanced mode > Scan to PC Settings.

  3. Select the application program you want and press OK.

    Default setting is My Documents.

    [Note]

    You can add or delete the folder where the scanned file is saved in Samsung Easy Printer Manager > Switch to advanced mode. > Scan to PC Settings.

  4. Select the option you want and press OK.

  5. Scanning begins.

    [Note]

    Scanned image is saved in computer’s C:\Users\users name\MyDocuments. The saved folder may differ, depending on your operatingsystem or the application you are using.