Machine’s basic settings

> > >

Machine’s basic settings


	You can set the machine’s settings by using the Device Settings in Samsung Easy Printer Manager program. For Windows and Mac users, you set from Samsung Easy Printer Manager > (Switch to advanced mode) > Device Settings, see Device Settings.

After installation is complete, you may want to set the machine's default settings.

To change the machine’s default settings, follow these steps:


	It may be necessary to press OK to navigate to lower-level menus for some models.

Select (Menu) > System Setup > Machine Setup on the control panel.

Select the option you want, then press OK.

Language: change the language that is displayed on the control panel.

Date & Time: When you set the time and date, they are used in delay fax. They are printed on reports. If, however, they are not correct, you need to change it for the correct time being.


	Enter the correct time and date using arrows or numeric keypad (see Keypad letters and numbers). Month = 01 to 12 Day = 01 to 31 Year = requires four digits Hour = 01 to 12 Minute = 00 to 59

Clock Mode: You can set your machine to display the current time using either a 12-hour or 24-hour format.

Power Save: When you are not using the machine for a while, use this feature to save power.


	When you press the (Power/Wake Up) button, start printing, or a fax is received, the product will wake up from the power saving mode.

Altitude Adj. Print quality is affected by atmospheric pressure, which atmospheric pressure is determined by the height of the machine above sea level. Before you set the altitude value, determine the altitude where you are (see Altitude adjustment).

Select the option you want, then press OK.
Press OK to save the selection.
Press (Stop/Clear) button to return to ready mode.


	Refer to below links to set other settings useful for using the machine. See Entering various characters. See Keypad letters and numbers. See Setting the paper size and type. See Setting up the fax address book.