Basic scanning

> > >


	For special scanning features, refer to the Advanced Guide (see Scan features).

This is the normal and usual procedure for scanning originals.

This is a basic scanning method for USB-connected machine.


	It may be necessary to press OK to navigate to lower-level menus for some models. If you want to scan using the network, refer to the Advanced Guide (see Scanning from network connected machine). C48xW series only support Scan to key on the control panel (see Basic scanning method).

Place a single document face down on the document glass, or load the documents face up into the document feeder (see Loading originals).

C48xW series: Press Scan to > Scan to PC > Local PC on the control panel.

C48xFN/C48xFW series: Select (scan) > Scan to PC > Local PC on the control panel.


	If you see Not Available message, check the port connection, or select Enable Scan from Device Panel in Samsung Easy Printer Manager > Advanced Setting > Scan to PC Settings.

Select the scan destination you want and press OK.

Default setting is My Documents.


	You can create and save the frequently used settings as a profile list. Also you can add and delete the profile and save each profile to a different path. To change the Samsung Easy Printer Manager > Advanced Setting > Scan to PC Settings.

Scanning begins.


	Scanned image is saved in computer’s C:\Users\users name\My Documents. The saved folder may differ, depending on your operating system or the application you are using.