Using SyncThru™ Web Service

[Note]
  • Internet Explorer 6.0 or higher is the minimum requirement for SyncThru™ Web Service.

  • SyncThru™ Web Service explanation in this user’s guide may differ from your machine depending on its options or models.

  • Network model only.

Accessing SyncThru™ Web Service

  1. Access a web browser, such as Internet Explorer, from Windows.

    Enter the machine IP address of your printer (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.

  2. Your machine’s embedded website opens.

Logging into SyncThru™ Web Service

Before configuring options in SyncThru™ Web Service, you need to log-in as an administrator. You can still use SyncThru™ Web Service without logging in but you won’t have access to Settings tab and Security tab.

  1. Click Login on the upper right of the SyncThru™ Web Service website.

  2. If it’s your first time logging into SyncThru™ Web Service you need to log-in as an administrator. Type in the below default ID and password. We recommend you to change the default password for security reasons.

    • IDadmin

    • Password sec00000

SyncThru™ Web Service overview

[Note]

Some tabs may not appear depending on your model.

Information tab

This tab gives you general information about your machine. You can check things, such as remaining amount of toner. You can also print reports, such as an error report.

  • Active AlertsShows the alerts that have occurred in the machine and their severity.

  • SuppliesShows how many pages are printed and amount of toner left in the cartridge.

  • Usage CountersShows the usage count by print types: simplex and duplex.

  • Current SettingsShows the machine’s and network’s information.

  • Print informationPrints reports such as system related reports and font reports.

Settings tab

This tab allows you to set configurations provided by your machine and network. You need to log-in as an administrator to view this tab.

  • Machine Settings tab: Sets options provided by your machine.

  • Network Settings tab: Shows options for the network environment. Sets options such as TCP/IP and network protocols.

Security tab

This tab allows you to set system and network security information. You need to log-in as an administrator to view this tab.

  • System SecuritySets the system administrator’s information and also enables or disables machine features.

  • Network SecuritySets settings for IPv4/IPv6 filtering.

Maintenance tab

This tab allows you to maintain your machine by upgrading firmware and setting contact information for sending emails. You can also connect to Samsung website or download drivers by selecting the Link menu.

  • Firmware UpgradeUpgrade your machine’s firmware.

  • Contact InformationShows the contact information.

  • LinkShows links to useful sites where you can download or check information.

Setting the system administrator’s information

This setting is necessary for using the e-mail notification option.

  1. Start a web browser, such as Internet Explorer, from Windows.

    Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address field and press the Enter key or click Go.

  2. Your machine’s embedded website opens.

  3. From the Security tab, select System Security > System Administrator

  4. Enter the name of the administrator, phone number, location, and email address.

  5. Click Apply.