> > Introduction > Turning on the machine

Turning on the machine

[Caution]

Keep in mind that you should use the power cord supplied with the machine. Otherwise, it can cause damage or fire to the machine.

  1. Connect the machine to the electricity supply first.

    Turn the switch on if the machine has a power switch.

  2. Power is turned on automatically.

[Note]

You can also turn the machine on pressing the (Power / Wake Up).
[Caution]

  • Some parts inside of the machine may be hot when power is on, or after printing. Be careful not to burn yourself when working inside the machine.

  • Do not disassemble the machine when it is turned on or plugged in. Doing so may give you an electric shock.

  • If you turn the machine off directly using the power switch, it could cause the hard disk problem in the machine.